|
公司基本資料信息
|
|||||||||||||||||||||||
點(diǎn)擊圖片查看原圖
HSF-10W series compact single switching power supply
Features:
·universal AC input
·Small volume，low weight，high efficiency
·Protections:short circuit/over load/over voltage/over temp
·cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
·2 Years warranty
|
Model |
HSF-10-5 |
HSF-10-9 |
HSF-10-12 |
HSF-10-15 |
HSF-10-24 |
|
|
output |
DC voltage |
5V |
9V |
12V |
15V |
24V |
|
Voltage tolerance |
±1% |
±1% |
±1% |
±1% |
±1% |
|
|
Rated current |
2A |
1.1A |
1A |
0.7A |
0.5A |
|
|
Current range |
0~2A |
0~1.1A |
0~1A |
0~0.7A |
0~0.5A |
|
|
Rated power |
10W |
9.9W |
12W |
10.5W |
12W |
|
|
Ripple&noise |
80mvp-p |
120mvp-p |
120mvp-p |
120mvp-p |
120mvp-p |
|
|
DCvoltage ADJ.range |
-9%~+10% |
±10% |
±10% |
±10% |
±10% |
|
|
input |
Voltage range |
90~264VAC，125~373VDC |
||||
|
frequency |
47~63HZ |
|||||
|
AC current |
0.25A/115VAC，0.15A/230VAC |
|||||
|
efficiency |
76% |
78% |
79% |
79% |
81% |
|
|
Inrush current |
Cold start current15A/115VAC，30A/230VAC |
|||||
|
Leakage current |
< 0.25mA/240VAC |
|||||
|
protection |
overload |
Rated output power115%~135% start over load protection |
||||
|
protection type:hiccup mode，auto-recovery after fault condition is removed |
||||||
|
Over voltage |
6.8~8.2V |
12.6~14.2V |
15.6~17.8V |
18.6~20.8V |
30.6~33.2V |
|
|
protection type:hiccup mode，auto-recovery after fault condition is removed |
||||||
|
Over temperature |
When temperature of transistor inner node is over150℃, start over temperature protection |
|||||
|
protection type:hiccup mode，auto-recovery after temperature become normal |
||||||
|
environment |
Working temp,humidity |
-10℃~+60℃，20%~90%RH |
||||
|
Storage temp,humidity |
-20℃~+85℃，10%~95%RH non-condensing |
|||||
|
Withstand vibration |
10~500HZ，2G10min/1cycle，period for 60 minutes，each axes |
|||||
|
safety |
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
||||
|
Isolated resistance |
I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC |
|||||
|
Fit standard |
Safety standard |
Compliance to UL1012 |
||||
|
EMC standard |
Compliance to EN55022，CLASSA |
|||||
|
others |
Dimension |
78*48*21mm(L*W*H) |
||||
|
Weight/packing |
0.08kg/200pcs/17kg/0.024 m³/0.87CUFT |
|||||
|
note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
|||||
