點擊圖片查看原圖
本開關柜符合 IEC60439-1、VDE0660 第 500 部分、GB7251.12-2013 國家標準，并通過了 3C 強制性產品認證。
Summary
MNS Iow voltage withdrawable switchgear is applied for power control and transmission system of AC 50Hz，rated working voltage up to 690V．It possesses the functions of controI of the equipment of power generating，transmission，distribution，transforming and consumption．This type of switchgear meets with the requirements 0f IEC60439- 1,Part 500 of VDE0660 and State standard of GB7251.12- 2013. The product has passed the"3C"compulsory certification ．
使用條件
環境溫度：上限+40℃，下限-5℃，24h 內平均溫度不高于+350℃。
海拔高度：不超過 2000m。
相 對 濕 度 ：空 氣 清 潔 ，相 對 濕 度 在 最 高 溫 度 為 + 40℃時不超過 50％；在較低溫度時允許有較高的相對濕度，例如+20℃時為 90％。但應考慮到由于溫度變化，有可能偶然產生凝露。
運輸儲存：-25℃至+55℃之間，在短時間內(不超過 24h)可達+70℃，在這些極限溫度下裝置不應遭到任何不可恢復的損傷，而且在正常的條件下應能
正常的工作。
注：超出上述條件，請與本公司協商。
Operational Conditions
Ambient Temperature：Max：+45℃，Min：-5℃，+35℃ average over 24 hours ．
AItitude：≤2000m ．
Relative Humidity：Not exceed 50％ in clear air with the max. temperature of + 40℃ ; Higher elative humidity is permitted in lower temperature.For example, the relative humidity is 90％for the temperature of+20℃。But the variety of temperature should be taken into con- sideration because it's possible to condensate ．
Transportation and Storage: The temperature is be- tween - 25℃ to + 55℃ . In short time(not exceed 24h)the temperature can be + 70℃,In the limited tempera- ture，the equipment should not suffer nonrecoverable damage and in the normal condition，the equipment
should work normally ．
Not：If the condition exceeds the above，please consult
with our company ．
產品特點
◎ 產品經過專業形象設計。
◎ 結構緊湊，以較小的空間容納較多的功能單元。
◎ 柜體能背靠背排列。
◎ 全部選用標準模塊，方便工程設計人員設計。
◎ 柜體可按照工作和環境的不同要求設計出相應的防護等級。
◎ 在一個柜體中可自由組合成不同型式，如固定式和抽屜式。
◎ 具有防電弧設計。
◎ 設備更新改進方便。
◎ 柜體最大程度地做到免維護。
◎ 有電纜側出線或后出線兩種方案。
◎ 獨特的機械鎖定機構，操作靈活方便，無需特殊復雜工具。
◎ 設備運行連續性和可靠性高。
◎ 大量采用高強度阻燃型工程塑料組件，操作人員人身安全有保障。
Characteristic
◎ After the professional image of product design ．
◎ The structure iS compact which can hold more functional units with smaller space ．
◎ The cubicles can be arranged rear to rear.
◎ Standardized modulars are used which is convenient for designing ．
◎ The cubicle can be of different protection degrees according to different working and environmental requirements ．
◎ In one cubicle，it can be composed to different types，such as fixed and withdrawable types ．
◎ It is designed for arc-protection ．
◎ The switchgear is convenient for renewal and improvement ．
◎ The cubicle is almost maintenance-free ．
◎ It has side outgoing and rear outgoing schemes ．
◎ It has unique mechanical locking mechanism，whichis convenient for operation without special tools ．
◎ The equipment is of high running continuousnessand reliability ．
◎ A lot of high intensity fire-resistant plastic assembliesare used，which can ensure the safety of operators ．